Our Products
Simon XT is a full-featured wireless home security System that’s installed in minutes yet delivers years of dependable protection for you and your family. Simon XT employs advanced wireless technology, so installation doesn’t involve the mess and expense of running wires to detectors and sensors.
Features:
* This unit acts as a cell phone. No land line required.
* Support for 40 Wireless Zones
* Large backlit LCD display
* Simple menu-driven settings for timers, latchkey, and pass code options
* Super loud siren
* Backup power supply keeps the system operating during power failures
* Up-front and easy-to-understand arm, disarm, and status buttons
* Emergency fast-action keys
* Microphone for emergency two-way communication with monitoring station personnel.
* Speaker for voice audio status messages and prompts, live communication with monitoring station personnel.
* Configurable “voice chimes”
* One-touch silence and sensor bypass buttons
* Simple operation with single button clicks on key fob
Simon XT is a full-featured wireless home security System that’s installed in minutes yet delivers years of dependable protection for you and your family. Simon XT employs advanced wireless technology, so installation doesn’t involve the mess and expense of running wires to detectors and sensors.
Features:
* Support for 40 Wireless Zones
* Large backlit LCD display
* Simple menu-driven settings for timers, latchkey, and pass code options
* Super loud siren
* Backup power supply keeps the system operating during power failures
* Up-front and easy-to-understand arm, disarm, and status buttons
* Emergency fast-action keys
* Microphone for emergency two-way communication with monitoring station personnel.
* Speaker for voice audio status messages and prompts, live communication with monitoring station personnel.
* Configurable “voice chimes”
* One-touch silence and sensor bypass buttons
* Simple operation with single button clicks on key fob
Our Crystal Door/Window Sensor protects anything that opens and closes, such as doors, windows, jewelry cases, and gun cabinets. Miniature model is less obtrusive to blend into your decor. White and brown models available.
Our Crystal Door/Window Sensor protects anything that opens and closes, such as doors, windows, jewelry cases, and gun cabinets.
This Mini Door/Window Contacts the smallest sensor of its kind yet to be manufactured in the security industry. Made for residential and commercial intrusion detection, This wireless sensor is only 1.75 inches long by .875 inches wide by .5 inches high–or 84% smaller than other wireless door/window security sensors.
Use door/window sensors to watch over anything you have that opens and closes, such as doors, windows, jewelry cases, and gun cabinets. The sensor automatically senses intrusion with a magnet and reed-switch mechanism that transmits a signal to an alarm in the event of an unauthorized entry.
This Wireless Recessed Door / Window Contact By GE is designed to protect doors and windows where the sensor should be concealed. Installs by drilling a .625″ Diameter hole 3.75″ deep. for the transmitter to mount into the frame. Then drill a .625″ hole by .625″ deep for the magnet to mount onto the door or window.
The PIR Wireless Motion Sensor detects movement inside an enclosed structure. Pet immunity up to 40 pounds Features: Use in large rooms, narrow corridors, and stairwells 3-minute motion lockout to conserve battery life Optional pet lens. This motion sensor provides the best solution for home owners who have pets, and want to still detect human movements.
Wireless Motion Detector by GE Security – This PIR motion detector is designed to detect movement inside an enclosed structure, or outdoors. The Small unobtrusive design will allow you to install the sensor in any location. This sensor provides the best overall human detection, while built-in false alarm prevention will ensure you only get an alarm, when an alarm is needed.
The DS 924 motion sensor comes with an ITI transmitter motion sensor that detects infrared energy given off by persons within a protected area. An alarm is indicated only if the sensor has been armed and the viewed energy has the correct motion, temperature, and timing matching a human intruder’s, thus ensuring that the number of false alarms is highly reduced. The sensor utilizes fresnel lenses to supply seven different coverage pattern options, including an exclusive pattern to protect against accidental activation by pets.
This Wireless Smoke detector features a built in fixed temp & Rate of rise heat sensor. This allows the sensor to detect heat over 135°F which is beneficial in situations where heat reaches the sensor before any smoke. This sensor also features a 15°F Rate of Rise per minute. So if the temperature raises faster than 15°F in less than 60 seconds which typically indicates a fire, the system will detect it.
Heat Sensor (Rate-of-Rise) The ITI Rate-of-Rise Heat Sensor detects danger in areas where high heat may normally occur, such as in kitchens or attics. The Heat Sensor works by detecting rapid temperature changes and extreme heat. Features: Provides detection in spaces up to 2,500 square feet. Rate-of-Rise sensor detects heat increases of 15° F/minute. A fixed-temperature sensor activates at 135° F.
American Sensor Carbon Monoxide sensor provides early warning of dangerous carbon monoxide gas levels. A pre-alarm warning feature indicates low levels of CO, and a built-in GE Learn Mode transmitter reports information to a GE Security System.
GE Wireless Freeze Sensor – Undetected furnace failure can lead to frozen and burst pipes, and serious expense. The GE Wireless Freeze sensor safeguards against extensive damage due to undetected freezing.
The GE Wireless water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.
The Wireless ShatterPro™ Series provides excellent false alarm immunity without compromising detection. It is ideal for applications where hard wired acoustic sensors are impractical. The low-profile sensor housing accepts most wireless transmitters inside the back box. Each sensor also ships with a mounting bracket for larger transmitters.
The Wireless ShatterPro™ Series is based on Sensor’s field-proven Pattern Recognition Technology ™, which listens across the glassbreak frequency spectrum for greater false alarm immunity. This allows the sensor to detect breaking glass through blinds and light, unlined drapes. The 584503/584509 low current consumption makes it compatible with most wireless transmitters. It features a 20′ (6.0 m) range from the sensor to the window. The Wireless ShatterPro™ Series is suitable for low-activity occupied areas on the perimeter loop.
For GE Security Systems – This Keychain Touchpads provides convenient, portable system control with ultimate security. ELM technology secures every wireless transmission by sending a unique message sequence between the control panel and touchpad.
Allows for Arm/Disarm Function from a distance of up to 300′.
The wall-mounted wireless TouchTalk 2-Way RF Touchpad. Designed for use with Simon version 3.0, TouchTalk provides convenient system control plus voice feedback and system status. Features: Convenient light control and system operation. Runs on user-changeable alkaline batteries with typical life of 3 years. Use up to 24 sensors/touchpads per system. Quick and easy to install. Hinged door covers buttons when not in use.
The Touchtalk 2-Way RF Touchpad, an alkaline battery-powered wireless touchpad, is designed to give users an easy choice for the following system operations
* Arming the system (doors, windows, and motion sensors).
* Arming the system with the option of No Entry Delay. Disarming the system.
* Activating a panic alarm to call the central monitoring station in an emergency which is non-medical.
* Check the system status.
* Switch the system controlled lights on or off (all at the same time or individually).
* Helps the user to listen to the voice feedback that is heard at the Simon 3 Control Panel.
The Touchpad is not controlled and has no tamper detection. A low battery condition is automatically detected by the touchpad and a signal is sent to the control panel. The voice feedback is heard by the touchpad that is in use alone. If the touchpad is in the process of talking, the panel remains silent, and vice versa. The touchpad is not designed to act as a siren and will not emit any alarm sounds or status beeps. This feature helps preserve battery life to the touchpad and gives feedback only to the user who requires it.
Water-Resistant Pendant Panic Sensor Designed to go just about anywhere, this sensor allows you to activate a 24-hour emergency alarm whether your at home, in the yard, or in the shower. Features: Water and shock resistant. Recessed panic button prevents false alarms. Can be worn around neck. Built-in belt clip allows sensor to be attached to belt or purse. Can be supervised.
Simon HiTech Handheld Touchpad Designed to provide users with a convenient option for system operations. Features: Arm and disarm the system. Panic alarm. Light control. Garage door operation.
This X10 Powerline transformer replaces the standard transformer that is included. This allows you full X10 Control through your Simon Control Panel
GE Simon 3 Wireless Security Installation Video
Table Top Mount for GE Simon 3 Wireless Security System.
ABN Broadband Adapter – Includes 3 months Free Monitoring from NextAlarm
No Phone Line – Phone line been Cut? No Problem – This wireless Will Get Through!
Add This Digital Cellular Dialer to any security system to contact the monitoring company. Use this as a full time dialer, or simply as a back-up if you phone line goes down. This universal dialer will connect to all existing security system panels, and requires no special programming. This dialer will transmit to any central monitoring station using most popular signaling formats.
The Uplink DigiCell 1500 typically transmits alarms in less than one second, versus the four to five seconds it takes for a phone line to dial the central station, dramatically reducing the time a professional thief has to disable an alarm panel. This feature becomes even more significant in a fire emergency, when every second counts. Uplink’s alarm acknowledgement feature guards against alarms ever being “lost”, as can happen with systems dependent on two-way radio, since Uplink continues to send an alarm until it is acknowledged by the network.
Our Flexguard Dual Technology Sound Sensor features additional false-alarm prevention measures that must feel the shock and hear the specific frequencies of breaking glass before it will sound off an alarm.
Emits loud volume alarm sounds for large indoor and outdoor areas.
Easy Control of Your Alarm
This wireless device allows you to switch your alarm system on or off with ease, whether you are inside or outside your house. Compact in size, it has very good range, and offers you the convenience of controlling your alarm panel remotely.
Avoid False Alarms
The greatest cause of false alarms is a result of errors in the entering of the access code. This device makes the entering of a code completely unnecessary. The purchase of additional keyfobs is highly recommended to be used by additional members of the family.
6.0 VDC, 1.2 AH Lead-Acid Backup Battery. This battery will last an entire 24 hours with no AC and specified standby load.
The Dialog™ Telephone Interface Module (DTIM) is a battery operated communication link between the control panel and the central monitoring station. The DTIM receives radio signals from the panel, then uses the phone line to report security system events to the central monitoring station.
The DTIM provides added security by separating the telephone interface from the panel. If the panel is damaged during a break-in or fire, the DTIM can still report to the central monitoring station.
The DTIM is a supervised device that transmits supervisory signals every hour for the panel to receive. When the battery is low, the module transmits a low battery signal.
This unit is a wireless device used for setting off medical alarms. The panic button can be worn on your wrist like a watch, clipped to a belt, used as a pendant or even installed on the wall. Water resistant up to 3′. Comes with a battery.
These piercing, plug-in sirens can be added anywhere around the home.
They work with any X10 security system such as:
Ademco Lynx – ITI Simon – Visonic Power Max. 105 db
Description: Plug-in modules for incandescent lamps. Ideal for controlling bedroom, living room, and family room table lamps. Lamps connected to this module can be dimmed.
Details: The Lamp Module responds to “All Lights On” command from any Controller or software set to its house code. The Lamp Module has a feature called “local control”. This feature enables you, at any time, to turn on the lamp plugged into the Lamp Module simply by turning the lamp’s power switch off then on again.
Features: Rated at 300W (incandescent). Dimmable through X10 controllers.
Plug-in modules for controlling appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV’s, etc. Controlled by any X10 programmable, wireless, or telephone controller.
Description: This is a two-way version of the traditional X10 appliance module (2 pin) that has some new features that users have been asking about for years. With the new two-way feature, computer interfaces that can generate “Status Request”, will receive an X10 signal back from the appliance module indicating it’s status, ON or OFF. The new two-way module is much more sensitive to the X10 signal. It was able to receive and react to X10 signals at 50 mV, whereas normal X10 modules need 100 mV of signal strength.
Get low volume status beeps along with full volume alarm sounds without running any wires! The Phone Jack Siren uses existing phone line wiring.
Replaces a current phone jack and provides another phone jack
Compatible with any hardwire or wireless system supplying 6-12 VDC
Status sounds have “Off” function
Max siren output of 85 dB
Flush mounting with a single gang box or wall mounting with back box
Upgrades your existing standard single pole wall switches. For automation of indoor/outdoor lights including front porch, patio, hallway, and stairway lights.
Description: X10 has for some time sold a screw-in Lamp Module but unfortunately its large size prohibited it from fitting in many types of light fixtures. Unlike other X10 modules, the new Socket Rocket (RLM20) Remote Controlled Screw-in Lamp Module has no code wheels. This allows for a very compact design. It is just 2 inches long and 1 inches in diameter, with a 3/8 of an inch bump on one side.
Its code is set up from any X10 controller and it then remembers this code, even if the power fails. You simply screw it into any light fixture, screw in a bulb, turn the power on, and then send it a code from any X10 Controller within 30 seconds . You send the same code three times. When the Socket Rocket (RLM20) receives the same code for the third time it turns on to let you know that it has “learned” the code. It then remembers this code indefinitely, even if the power fails. To “teach” the Socket Rocket (RLM20) a new code, you just remove the power, reapply it, and then send it the new code three times. The next Socket Rocket you install will not override the last one due to the 30 second time-to-program feature.
The fact that the Socket Rocket (RLM20) remembers the code even after the power is removed means that you can set up the code in any convenient indoor lamp and then move the module to its final location, which might be in an outside light fixture for example. This means you don’t have to install it outside and then run in and out of the house while setting it up. The Socket Rocket (RLM20) does not have any dimming functions.